What our lines
can actually do.
Equipment lists are easy to print. What buyers need to know is the working range: what size we can hold, which finishes are in-house, and where the limit sits — this page states both.
Eight processes,
one site.
Daily capacities below are for a single shift. Double them for peak season, and tell us your deadline early — we plan container space two weeks ahead.
| Process | Equipment | Working range | Daily capacity |
|---|---|---|---|
| Wire drawing | Drawing benches ×3 | Ø1.5 – 6.0 mm, low-carbon & galvanized | 12 t |
| Straightening & cutting | Auto cutters ×6 | 40 – 3,000 mm lengths | 18 t |
| Mesh welding | Spot & multi-head welders ×8 | Mesh 25×25 up to 100×200 mm | 2,400 panels |
| Chain-link weaving | Weaving machines ×4 | 25 – 75 mm mesh, up to 2.4 m wide | 1,600 m² |
| Bending & forming | Press brake, tube benders ×6 | Up to 2,500 mm bend length | 1,800 pcs |
| Punching | Presses ×4 | Ø4 – 20 mm holes, up to 4 mm sheet | 20,000 hits |
| Powder coating | Automatic line + manual booth | RAL range, 0.1 – 0.2 mm film | 3,000 m² |
| Assembly & packing | 4 packing stations | Flat-pack cartons, pallets, FBA labels | By order |
Hot-dip galvanizing is done with a certified partner 12 km away — same city, same week.
The finish is
half the product.
A fence that rusts in two years comes back as returns at your end and a lost account at ours. So the coating spec is written into the quotation, not left to the batch.
- Pre-galvanized wire from certified coil suppliers only — every coil traceable to its mill certificate.
- PVC coating 0.1–0.2 mm on wire mesh — black, green, white or matched to your sample.
- Powder coating on frames and tube — sprayed, then cured in a high-temperature oven; 0.1–0.2 mm film, any RAL number, salt-spray tested.
- Galvanized iron wire Q195/Q235 standard on every panel.
Where the limits are.
Published limits save a week of back-and-forth. If your spec sits outside a row below, tell us anyway — sometimes a small design change brings it back in.
| Parameter | Standard | Tightest |
|---|---|---|
| Panel length / width | ±3 mm | ±1.0 mm |
| Wire diameter | ±0.15 mm | ±0.08 mm |
| Mesh pitch | ±2 mm | ±0.5 mm |
| Powder film thickness | 0.1–0.2 mm | ±0.02 mm |
| Colour match | RAL chart | Physical sample |
| Item | Value | Note |
|---|---|---|
| Minimum order (stock) | 300 pcs | Per item, mixed colours allowed |
| Minimum order (custom) | 1×20GP | Lower for repeat tooling |
| Sampling time | 7–10 days | 3–5 days for repeat items |
| Tooling cost | Quoted per drawing | Refunded at 3rd bulk order |
| Max panel size | 2,400 × 3,000 mm | Larger = split & bolted |
Three entry points.
Most buyers start with one of these and move down the list as volumes grow.
Catalogue items, your label
Standard sizes from our current range, with your logo plate and printed carton. Fastest route, lowest risk, MOQ from 300 pcs.
See the range →Modified to your spec
Take a catalogue item and change size, mesh, colour, thickness or packing. No new tooling in most cases — sampling starts in days.
How OEM works →Full build from your drawing
New tooling, prototype, drop test, packaging artwork. We sign an NDA before we open the drawing, and the tooling stays yours.
Send a drawing →Test a spec
before you commit.
Send us one line of specification and we will tell you whether it is within our range, what it costs, and when it ships.
- Feasibility note Within 24 hours
- Sample 7–10 days
- Drawings NDA on request